close
close
Whirlpool Duet Dryer Not Starting Sensing

Whirlpool Duet Dryer Not Starting Sensing

Whirlpool Duet Dryer Not Starting Sensing. Whirlpool duet dryer wont start sensing light on the sensor is located on the back of the dryer, and it can be reset by unplugging the power cord from the dryer. As your load of laundry tumbles in the drum, it makes contact with the sensor strips so that the dryer can end the cycle when your laundry is dry.

Whirlpool Duet Dryer Not Starting Sensing Mnweathercenter
Whirlpool Duet Dryer Not Starting Sensing Mnweathercenter from dungcuthethaovn.com

As your load of laundry tumbles in the drum, it makes contact with the sensor strips so that the dryer can end the cycle when your laundry is dry. If the dryer is not level, the sensing does not work properly, and your drying cycle will end early. When start button is pushed, the sensing light comes on as it should, but the dryer will not start.

Next, Find The Sensor And Disconnect It From The Wiring Harness.

All whirlpool duet dryers have sensor strips in the drum. As your load of laundry tumbles in the drum, it makes contact with the sensor strips so that the dryer can end the cycle when your laundry is dry. I have checked the thermal fuse and it is ok.

After Reading Thru Other Posts, I Replaced The Control Board But This Has Not Resolved The Issue.

My duet dryer won't start as it is stuck on sensing. Whirlpool duet dryer wont start sensing light on the sensor is located on the back of the dryer, and it can be reset by unplugging the power cord from the dryer. If the dryer is not level, the sensing does not work properly, and your drying cycle will end early.

That Means If The Sensing Feature Is Not Properly Set Or It Is Faulty, The Dryer Will End Prematurely Or Not Sense A Dry Laundry At All.

As your load of laundry tumbles in the drum, it makes contact with the sensor strips so that the dryer can end the cycle when your laundry is dry. I verified that the sensors are working by going thru the diagnostics. Several factors may cause your whirlpool duet dryer not to start.

When Start Button Is Pushed, The Sensing Light Comes On As It Should, But The Dryer Will Not Start.

If the dryer is not level, the sensing does not work properly, and your drying cycle will end early. Whirlpool duet dryer will not start but powers on. It may be because of power issues, a faulty motor, problems with the start button, a blown thermal fuse, or a defective door switch.

If The Dryer Is Not Level, The Sensing Does Not Work Properly, And Your Drying Cycle Will End Early.

Any assistance would be greatly appreciated. Whirlpool duet sport dryer model wed8410sw2: You can troubleshoot most of these problems, but.

Leave a Reply

Your email address will not be published.