Washing Machine Won't Start Cycle. Meanwhile, check the line fuse or user control and display board if. Why ge washer won’t start cycle.
Naturally, it can’t do this if the door is open, so the washer won’t start. This issue is likely the result of a faulty timer, water line valve, or lid switch. To do this safely, the washer locks its lid or door when the cycles are running.
The Problem Could Be With The Door Interlock.
The most common reason a washing machine will not start is that the drain is plugged. Purchase an ohmmeter on amazon. Meanwhile, check the line fuse or user control and display board if.
Spin And Stain/Rapid For 7 Seconds.
Reset the breaker and try to start the washer. Some machines have board control panels where several functions of the machine are located. If the washer doesn’t respond when you push a start button — or it runs in cycles without starting — the user control board may be defective.
If The Ge Washer Is Not Level, The Motor Shaft Could Be Bent.
See if delay start has been pushed. Make sure the power cord is plugged in. The following control panel indicators can determine why the washer won’t start:
Turning Child Lock Off Will Usually Take Care Of Your Problem.
Often appliances can flip the wall socket switch if they move about during the cycle, so it is worth seeing if this is the case. Here we are mentioning the general reasons that your ge washer won’t start the cycle. If this function is activated, a small dot at the bottom of the control panel will flash.
The Next Suspect Is That The Machine Is Waiting For The Door To Be Closed Because The Power Goes Straight From The Display And Main Control Board To The Door.
If your child lock icon is lit or flashing, this confirms it. See if control lock has been activated. Make sure the machine is tightly plugged in.