My Lawn Mower Won't Start What Should I Do. The first is to try to research why the problem is occurring. When you’re in the middle of troubleshooting why your riding mower won’t start, you can often skip the simple obvious solutions like adding gas to your mower.
And if this is the problem, the fact that it’s not starting probably means that there’s a lot of water in there, as no gas is getting through whatsoever. When you’re in the middle of troubleshooting why your riding mower won’t start, you can often skip the simple obvious solutions like adding gas to your mower. They’re easy enough to figure out:
Check The Fuel Intake System:
Stale fuel is the number one reason a lawnmower won’t start after winter so be absolutely sure that you aren’t trying to start a lawnmower with stale fuel. When your riding mower won’t start, carefully go through the starting procedure. Here's why, in most cases when it comes to a push mower it is not worth spending the money to have a professional repair it.
And It Still Won't Start You May Need A New Mower.
If the fuel is more than a month old, dispose of it properly and refill the tank with fresh gas. Thus, before you throw a fit, check your mower’s fuel level. If it is, you should change the oil.
It Sounds Crazy But It’s Likely Your Lawn Mower Won’t Start Because It Has No Juice.
A lawnmower should always be tilted carburetor side up; If your air filter isn’t clean, it will make life hard for your mower. It may take quite a few pulls to suck the new gas into the lawn mower carburetor, so be prepared.
If You’re Sure You’ve Got Everything Right And Checked Cables, Proceed To Troubleshoot The Problem Using The Step Above.
If you lose power when you’re mowing the lawn, the effects of a long, cold winter may have caused issues with pumps, seals, and valves in the carburetor. Sometimes, you might have forgotten a step like pressing the parking brake or standing while starting the device. Engine is not getting the fuel it needs.
My Lawn Mower Won’t Start.
Add fresh fuel to an empty gas tank. You crank and crank that pull cord, but nothing happens. Check the oil level before starting the machine and see that it is clear, not dark and full of debris;